Pasar al contenido principal

page search

Biblioteca Identifying sensitive areas to wind erosion in the Xilingele grassland by computational fluid dynamics modelling

Identifying sensitive areas to wind erosion in the Xilingele grassland by computational fluid dynamics modelling

Identifying sensitive areas to wind erosion in the Xilingele grassland by computational fluid dynamics modelling

Resource information

Date of publication
Diciembre 2012
Resource Language
ISBN / Resource ID
AGRIS:US201400153232
Pages
37-47

In order to identify the areas in the Xilingele grassland which are sensitive to wind erosion, a computational fluid dynamics model (CFD-WEM) was used to simulate the wind fields over a region of 37km2 which contains different topography and land use types. Previous studies revealed the important influences of topography and land use on wind erosion in the Xilingele grassland. Topography influences wind fields at large scale, and land use influences wind fields near the ground. Two steps were designed to implement the CFD wind simulation, and they were respectively to simulate the influence of topography and surface roughness on the wind. Digital elevation model (DEM) and surface roughness length were the key inputs for the CFD simulation. The wind simulation by CFD-WEM was validated by a wind data set which was measured simultaneously at six positions in the field. Three scenarios with different wind velocities were designed based on observed dust storm events, and wind fields were simulated according to these scenarios to predict the sensitive areas to wind erosion. General assumptions that cropland is the most sensitive area to wind erosion and heavily and moderately grazed grasslands are both sensitive etc. can be refined by the modelling of CFD-WEM. Aided by the results of this study, the land use planning and protection measures against wind erosion can be more efficient. Based on the case study in the Xilingele grassland, a method of regional wind erosion assessment aided by CFD wind simulation is summarized. The essence of this method is a combination of CFD wind simulation and determination of threshold wind velocity for wind erosion. Because of the physically-based simulation and the flexibility of the method, it can be generalised to other regions.

Share on RLBI navigator
NO

Authors and Publishers

Author(s), editor(s), contributor(s)

Zhang, Zhuodong
Wieland, Ralf
Reiche, Matthias
Funk, Roger
Hoffmann, Carsten
Li, Yong
Sommer, Michael

Publisher(s)
Data Provider